300+ SCADA Protocol Articles & Guides
Deep dives on Modbus, DNP3, IEC 60870-5-101/104, IEC 61850, OPC UA, Profinet, MQTT, IEC 62443, and substation automation — written for practicing engineers.
Modbus TCP ControlLogix Setup in Studio 5000
Modbus TCP ControlLogix setup three ways: the ProSoft MVI56E-MNETC module, AOI socket messaging, and a gateway, with pitfalls and performance notes for each.
Allen-Bradley EtherNet/IP: CIP Configuration Guide
Allen-Bradley EtherNet/IP setup on ControlLogix and CompactLogix: implicit vs explicit messaging, Generic Ethernet Module, MSG instructions, and fault codes.
EtherNet/IP vs Modbus TCP: Complete Comparison Guide
EtherNet/IP vs Modbus TCP: detailed comparison of data models, performance, ports, security, deployment scenarios. When to choose which protocol.
DLR Device Level Ring Explained: Ring Redundancy for EtherNet/IP
How DLR delivers 3 ms recovery on EtherNet/IP rings: ring supervisor election, beacon frames, fault detection, topology limits, and troubleshooting.
Modbus TCP CompactLogix Setup in Studio 5000
Modbus TCP CompactLogix setup with Rockwell's free AOI in Studio 5000: client and server roles, AOI parameters, polling multiple devices, and gateway options.
PROFINET vs EtherNet/IP: Complete Comparison for Industrial Engineers
PROFINET vs EtherNet/IP compared: protocol architecture, real-time performance, GSDML vs EDS, PROFIsafe vs CIP Safety, installed base, and when to choose each.
CIP Protocol Ports: How EtherNet/IP Uses Ports 44818 and 2222
CIP Protocol Ports explained: learn how EtherNet/IP uses ports 44818 and 2222 to transport CIP messages for configuration, diagnostics, and real-time I/O communication.
Beacon Redundancy Protocol (BRP) Explained – IEC 62439-5 Guide
Learn how Beacon Redundancy Protocol (BRP) works under IEC 62439-5, including architecture, fault detection, message types, and recovery times.