#function codes
11 articles tagged with #function codes. This page is set to noindex per SEO configuration.
Modbus TCP Beckhoff TwinCAT: Client and Server Setup
Modbus TCP Beckhoff TwinCAT configuration with TF6250: client function blocks, server XML mapping, licensing by TwinCAT version, and the usual failure points.
Modbus TCP CODESYS: Step-by-Step Configuration
Modbus TCP CODESYS configuration for WAGO, Phoenix Contact, ABB, and Delta PLCs: master and slave setup, channel configuration, and vendor-specific notes.
Modbus TCP ControlLogix Setup in Studio 5000
Modbus TCP ControlLogix setup three ways: the ProSoft MVI56E-MNETC module, AOI socket messaging, and a gateway, with pitfalls and performance notes for each.
Modbus Broadcast Function Codes: Address 0 Explained
Modbus broadcast on address 0: which function codes support it, how serial and TCP differ, turnaround timing, gateway behavior, and when to actually use it.
Modbus Exception Codes Explained: Complete Reference
Modbus exception codes 01 through 0B in full: Illegal Function, Illegal Data Address, Slave Device Failure, and gateway errors, each with the fix that works.
Modbus TCP CompactLogix Setup in Studio 5000
Modbus TCP CompactLogix setup with Rockwell's free AOI in Studio 5000: client and server roles, AOI parameters, polling multiple devices, and gateway options.
Modbus Register Map Explained: How to Read Any Device
Modbus register map reading made reliable: the four register types, the zero-based offset trap, data types inside registers, byte order, and scale factors.
Modbus Function Codes Explained with Real Examples
Modbus function codes with real hex frames: FC 01 to 06, FC 15 and 16, FC 23 and 43, plus register type matching and the mistakes that cause exceptions.
How to Configure Modbus RTU Over RS-485: Step-by-Step
Modbus RTU over RS-485 configured step by step: bus wiring and topology, termination and biasing, addressing, register types, and T1.5 and T3.5 timing.
DNP3 Protocol: How It Works, Objects, and Function Codes
DNP3 protocol explained with IEEE 1815-2012 detail — the four layers, object groups and variations, all 33 function codes, IIN bits, and conformance levels.
Modbus Protocol Explained: RTU, TCP, ASCII, and Frames
Modbus protocol explained end to end: RTU, TCP, and ASCII variants, frame structure, function codes, master-slave architecture, and field troubleshooting.